andex-5.1.1-desktop-160215-smallNEWS 160215: Build 151010 has been replaced by Build 160215, which is totally error-free and has some extra features.

MORE NEWS 160215
My new build of Android-x86 Lollipop 5.1.1 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. The ISO is called android-x86-lollipop-5.1.1-exton-kernel4.4-mesa-507mb-160215.iso. AndEX 160215 is totally error-free. For installing new apps you shall always use Google Play Store in AndEX Build 160215. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

Used kernel
4.4.0-exton-android-x86. The original Android-x86 Lollipop version uses kernel 4.0.9.

About AndEX

My compiled Androidx86 system (Lollipop 5.1.1) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run this version without problems on a HP Pavilion 500-317no Desktop Computer. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.1.1 is one of the latest versions of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 4.4.0-exton-android-x86 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2016-02-14 will also cost you 9 $. I has one advantage over the Lollipop version: The system can be used also on older laptops. Read more about the KitKat 4.4.4 version 160214 or DOWNLOAD it instantly.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support all Broadcom wifi cards. I have experience from two different cards – BCM4311 and BCM43142. The first mentioned one works. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run AndEX you’ll have to use a wired connection.

Installing new apps in AndEX Lollipop
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should always use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Installing 3D games
I wrote an article 150608 about installing 3D games in my KitKat 4.4.4 Build 6. The same games can be installed in AndEX Build 160214. I have also tested Cars: Fast as Lightning and Trials Frontier in AndEX. Those apps ran without problems.

Install the system to hard drive
Say for example that you have a laptop with Windows 10 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of AndEX. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 5.1.1 Lollipop 160215 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2016-02-15/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 \
acpi_sleep=s3_bios,s3_mode  SRC=/android-2016-02-15 DPI=160 UVESA_MODE=1920×1080 \

initrd /android-2016-02-15/initrd.img

: On some computers you may have to add nomodeset to the linux boot line. If so you may also have to remove DPI=160 and UVESA_MODE=1920×1080 from the boot line. (AndEX won’t start otherwise).

: The DPI=160 entry provides a hint about the display’s pixel density in dots per inch. This is an important setting – if the Android display’s icons and text look too small and crowded, increase this number. If things seem too big, make it smaller.

NOTE 3: The UVESA_MODE=1920×1080 entry describes the display size. This is also an important setting. If you know your display’s actual dimensions, enter them here. But not all dimensions work – it sometimes happens that a display specification that’s possible in principle isn’t feasible in practice.

If you use Grub Legacy (which is very unusual today even though Android Lollipop uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 5.1.1 Lollipop 160215 (sda8)
root (hd0,7)

kernel /android-2016-02-15/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2016-02-15
initrd /android-2016-02-15/initrd.img

About error 963 and Google Play Store
If you have installed AndEX on an ext3 partition you may get the dreaded error message 963 when trying to install new apps via Google Play Store. According to many forum posts and my own experience the only real good fix is to install Andex/Lollipop to an ext4 partition. There we have another problem since Grub2 can’t be installed to an ext4 partition when installing AndEX/Lollipop. That problem can only be solved if you have Grub2 installed in another Linux system on your computer. (Then you can use an ext4 partition for the installation and afterwards edit your Grub2 installation in your other Linux system). This problem with ext3/ext4 (error 963) is only applicable for AndEX/Lollipop. I.e. Google Play Store will work as expected in my KitKat version of Android-x86 even if the Android system is installed on an ext3 partition. Note: This error will probably not show up in AndEX Build 160215.

Other problems with Google Play Store
Under certain circumstances Google Play Store can crash. What you can do then is to install the latest version of Google Play Store using Aptoide App Manager. Before that you should go to Settings and remove all traces of Google Play Store from “data” and “system”. After that reboot your computer before you go on and install the new downloaded version of Google Play Store. Note: You can’t upgrade Google Play Store using Google Play Store. Here Aptoide come in handy.

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence. Read under A).


You can run/test the AndEX system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. My other Android remaster KitKat 4.4.4 version 9 160214 can also run very well in VirtualBox.

This build of AndEX (160215) replaces Build 151010. No need to upgrade if you already have a working version of Build 151010 installed. All installed apps (GAPPS and others) will then be in the same version as in build 160215 of AndEX. I.e. if you install Andriod-x86 to hard drive or to a USB stick with persistence all installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone. If, however, you need or want this new version (with a newer kernel) you can contact me so I can send you a download link. Please then show your receipt for AndEX Lollipop Build 151010 or 150916.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 160215 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 Build 9 160214 will run also on older computers.

Screenshot 1 – AndEX Desktop
Screenshot 2 – AndEX running GT Racing 2 – 890 MB (!)
Screenshot 3 – AndEX running Trials Frontier
Screenshot 4 – AndEX running Stick Tennis
Screenshot 5 – AndEX with extra apps
Screenshot 6 – AndEX running 3D Chess
Screenshot 7 – AndEX running Pool Break 3D

Before you buy and download this version of AndEX you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86 system. Some very big (around 1GB) games for example won’t run. On the other hand I could run Pes Club Manager, which is of 866 MB.

This build of AndEX (160215) replaces Build 151010, which also had GAPPS pre-installed.

DOWNLOAD for 9 $ android-x86-lollipop-5.1.1-exton-kernel4.4-mesa-507mb-160215.iso

Note3: Android-x86 KitKat 4.4.4 Exton build 9 160214 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.1.1.

Note4: The AndEX Lollipop ISO has been out on and the Swedish Linux Society for free from 150307 until 150402. The ISO file was downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Android is a trademark of Google Inc.