Tag: KitKat 4.4.4

Android-x86 KitKat 4.4.4 Build 9 with GAPPS, kernel 4.4.0-exton-android-x86, Bluetooth (working!) and Mesa 10.5.9

android-x86-desktop-160214-smallAndroid-x86 KitKat 4.4.4 Exton build 160214, version 9, is a ready!
I’ve added Mesa (3D Graphics Library) 10.5.9 for better Graphic performance. The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run this version without problems on a HP Pavilion 500-317no Desktop Computer. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store and Aptoide App Manager are pre-installed so you can just make your choices…

Used kernel
4.4.0-exton-android-x86. The original Android-x86 KitKat version uses kernel 4.0.9.

Replacement
This version (version 9) replaces all my previous (8) Android-x86 4.4.4 KitKat builds. In version 9 (as in version 8) I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. Everything just works.

My sources
My KitKat Build 9 is based on the Android-x86 ProjectRun Android on your PC. So is my other Android-x86 builds.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support all Broadcom wifi cards. I have experience from two different cards – BCM4311 and BCM43142. The first mentioned one works. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run my KitKat build 9 you’ll have to use a wired connection.

Install to hard drive
Say for example that you have a laptop with Windows 10 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler during the installation of Android KitKat.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom:
(Example):
menuentry ‘Android-x86 4.4.4 KitKat 160214 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2016-02-14/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86  \
acpi_sleep=s3_bios,s3_mode SRC=/android-2016-02-14 DPI=160 UVESA_MODE=1920×1080 \

initrd /android-2016-02-14/initrd.img
}

NOTE 1: On some computers you may have to add nomodeset to the linux boot line. If so you may also have to remove DPI=160 and UVESA_MODE=1920×1080 from the linux boot line. (AndEX won’t start otherwise).

NOTE 2: The DPI=160 entry provides a hint about the display’s pixel density in dots per inch. This is an important setting – if the Android display’s icons and text look too small and crowded, increase this number. If things seem too big, make it smaller.

NOTE 3: The UVESA_MODE=1920×1080 entry describes the display size. This is also an important setting. If you know your display’s actual dimensions, enter them here. But not all dimensions work – it sometimes happens that a display specification that’s possible in principle isn’t feasible in practice.

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 160214 (sda8)
root (hd0,7)

kernel /android-2016-02-14/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2016-02-14
initrd /android-2016-02-14/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for my KitKat version. You can run Android-x86 from a USB stick with persistence. I.e. all system changes will be saved on the stick.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot.

Runs in VirtualBox
You can also run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox. Note: A Marshmallow Android-x86 system can normally not run in VirtualBox.

Updates
If you install Andriod-x86 to your hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

ATI Radeon compatibility
I can mention that this KitKat Build 9 works on my old Acer Aspire 5102WLMi AMD with ATI Radeon Xpress 1100. Many 3D games run just fine.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.

Need to upgrade?
Well, if you have installed any of my previous KitKat versions with GAPPS to your hard drive and the system is working alright you don’t “have to” upgrade. That’s because (as I say above) all included GAPPS will be upgraded automatically (just like your Android phone). Otherwise you can contact me so I can send you the new download link. Then please show your previous receipt.

Screenshots
The Airplane 3D Live Desktop pic 1
Showing all installed apps pic 2
Enable Bluetooth in Settings pic 3
Scanning for Bluetooth devices with Bluetooth File Transfer pic 4

DOWNLOAD android-x86-kitkat-kernel4.4-exton-mesa-gapps-513mb-160214.iso for 9 $


md5sum

Android is a trademark of Google Inc.

15 Comments AndEXAndroid

Android-x86 KitKat 4.4.4 Build 8 with GAPPS, kernel 4.0.9-exton-android-x86, Bluetooth (working!) and Mesa 10.5.9

android-x86-kitkat-exton-160125-smallAndroid-x86 KitKat 4.4.4 Exton build 160125, version 8, is a ready!
I’ve added Mesa (3D Graphics Library) 10.5.9 for better Graphic performance. The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store is pre-installed so you can just make your choices…

Used kernel
4.0.9-exton-android-x86.

Replacement
This version (version 8) replaces all my previous (7) Android-x86 4.4.4 KitKat builds. In version 8 (as in version 7) I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps (for example Bluetooth File Transfer, Spotify and WPS Office). Everything just works.

My sources
My KitKat Build 8 is based on the Android-x86 ProjectRun Android on your PC. So is my other Android x86 builds.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support Broadcom wifi cards. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run my KitKat build 8 you’ll have to use a wired connection.

Install to hard drive
Say for example that you have a laptop with Windows 10 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler during the installation of Android KitKat.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom:
(Example):
menuentry ‘Android-x86 4.4.4 KitKat 160125 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2016-01-25/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2016-01-25
initrd /android-2016-01-25/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 160125 (sda8)
root (hd0,7)

kernel /android-2016-01-25/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2016-01-25
initrd /android-2016-01-25/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for my KitKat version. You can run Android-x86 from a USB stick with persistence. I.e. all system changes will be saved on the stick.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot.

Runs in VirtualBox
You can also run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox. Note: A Lollipop Android-x86 system can normally not run in VirtualBox.

Updates
If you install Andriod-x86 to hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

ATI Radeon compatibility
I can mention that this KitKat Build 8 works on my old Acer Aspire 5102WLMi AMD with ATI Radeon Xpress 1100. Many 3D games run just fine.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.

Screenshots
The Japanese Koi Fish Desktop pic 1
Showing all installed apps pic 2
Enable Bluetooth in Settings pic 3
Scanning for Bluetooth devices with Bluetooth File Transfer pic 4

DOWNLOAD
This build (8) has been replaced by Build 9 from 160214.

Android is a trademark of Google Inc.

No Comments AndEXAndroid

Android-x86 KitKat 4.4.4 build 7 with GAPPS, kernel 4.0.8-exton-android-x86, Bluetooth (working!) and Mesa 10.5.9

desktop-kitkat-v7-smallAndroid-x86 KitKat 4.4.4 Exton build 150721, version 7, is a total rebuild.
I’ve added Mesa (3D Graphics Library) 10.5.9 for better Graphic performance. It has enabled hardware acceleration for Nvidia (Nouveau) and VMware (vmwgfx). The system can run live (from CD or a USB stick) on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can easily install the system to your hard drive and install new apps. You can also install new apps while running the system live. Google Play Store is pre-installed so you can just make your choices…

Used kernel
4.0.8-exton-android-x86.

Replacement
This version (version 7) replaces all my previous (6) Android-x86 4.4.4 KitKat builds. In version 7 (as in version 6) I’ve added GAPPS. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps (for example Bluetooth File Transfer). Everything just works.

My sources
My KitKat build v7 is based on the Android-x86 ProjectRun Android on your PC. So is my other Android x86 builds.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support Broadcom wifi cards. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run my KitKat build 7 you’ll have to use a wired connection.

Install to hard drive
Say for example that you have a laptop with Windows 10 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler during the installation of Android KitKat.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom:
(Example):
menuentry ‘Android-x86 4.4.4 KitKat 150721 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-07-21/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-07-21
initrd /android-2015-07-21/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 150721 (sda8)
root (hd0,7)

kernel /android-2015-07-21/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-07-21
initrd /android-2015-07-21/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for my KitKat version. You can run Android-x86 from a USB stick with persistence. I.e. all system changes will be saved on the stick.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot.

Runs in VirtualBox
You can also run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox. Note: A Lollipop Android-x86 system can normally not run in VirtualBox.

Updates
If you install Andriod-x86 to hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

ATI Radeon compatibility
I can mention that this KitKat Build 7 works on my old Acer Aspire 5102WLMi AMD with ATI Radeon Xpress 1100. Many 3D games run just fine.

What’s the point?

Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Read my article About how useful an Android-x86 system can be for the average computer user.

Screenshots
The Space Galactic Live Desktop pic 1
Showing all installed apps pic 2
Enable Bluetooth in Settings pic 3
Scanning for Bluetooth devices with Bluetooth File Transfer pic 3

This version (7) has been replaced by version 8 Build 160125

Android is a trademark of Google Inc.

11 Comments AndEXAndroid

Many games (3D and others) can run on my Android-x86 KitKat 4.4.4 Build 6

Installing Game apps on Android-x86 KitKat 4.4.4 build 6 with GAPPS, kernel 4.0.0-exton-android-x86 and Mesa 10.5.4
One member on this site said this yesterday:  KitKat Build 6 has indeed great 3d performance, I tested some games and all run VERY fast:
Clash Of Clans
Max Payne
Grand Theft Auto 3

To verify that I did test installations today of some games: Clash Of Clans, Max Payne, Grand Street Auto 5, Juventus Fantasy Manager 2015, Shoot The Chicken Pro, Candy Crush and Angry Birds. See this slideshow.

All those games ran without problems. Many more can be installed of course. Maybe this is interesting for all game enthusiasts…

1 Comment AndEXAndroid

My third build of Android-x86 KitKat with kernel 3.18.8-exton-android-x86: v.150321

Android logoI have compiled yet another Android x86 system (KitKat 4.4.4), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

Replacement for Windows, Mac or even Linux Desktop systems?
Some belive what I just said. The Android-x86 Project (Run Android on your PC) is about porting the Android Open Source Project to x86 platform. The Android-x86 Project’s latest release is Android-x86 4.4-r2 from 2015-01-01. The ISO file can be downloaded for free from SourceForge.net or Softpedia. My Android-x86 KitKat 4.4.4 v3 build from 2015-03-21 will cost you 8 $. It has three advantages over the my free Lollipop 5.0.2 versionAptoide App Manager (Google Play Store is used as App Manager in my first version of Android-x86 KitKat from 150301) is pre-installed, a newer kernel (3.18.8) is used and you can run the system in VirtualBox. Read more about my KitKat 4.4.4 version 3 or DOWNLOAD it instantly…

Screenshot
Click to view a larger picture

Kernel
Kernel 3.18.8-exton-android-x86 is used.

Installing new apps
Aptoide App Manager is pre-installed (among many other apps) so you can just go ahead and make your choices. Aptoide works even better than Google Play Store, which is used as App Manager in my first version of Android-x86 KitKat from 150301.

Other important pre-installed apps in version 150321
Facebook, IMDb, Spotify, WPS Office, Instagram, Tvitter, Yr.no, Rotation Control Lite, 1Mix Radio, Secure Web and Wallpaper Store.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler/loader during the installation of Android KitKat. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”
If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 4.4.4 KitKat 150321 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-21/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-21
initrd /android-2015-03-21/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 150321 (sda8)
root (hd0,7)

kernel /android-2015-03-21/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-21
initrd /android-2015-03-21/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for all of my KitKat versions.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot. On my new HP Pavilion Desktop computer it looks like this.
bios-hp-pavilion

VirtualBox
You can also (of course) run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox.

About Google Keyboard
If you get a message that Google Keyboard has crashed you shall go to Settings >> Language & Input and disable Google Keyboard. The keyboard will work as normal after that.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.

Screenshots
The Desktop pic 1
The Desktop pic 2
The Desktop pic 3
All pre-installed apps
Aptoide App Manager is used
Shows how easy it is to change Desktop wallpaper
Poweroff

Reviews
Softpedia’s review of AndEX (Android-x86) Lollipop 5.0.2

Softpedias review of Android-x86 KitKat 4.4.4 Exton build 1 and 2 150307
_____________________________________________________________________

NOTE
This version has been replaced by version 5 150504 with kernel 4.0.0-exton-android-x86 and GAPPS

Exton logo

1 Comment AndEXAndroid

My second build of Android-x86 KitKat with kernel 3.18.8-exton-android-x86

Android logoI have compiled yet another Android x86 system (KitKat 4.4.4), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

Replacement for Windows, Mac or even Linux Desktop systems?
Some belive what I just said. The Android-x86 Project (Run Android on your PC) is about porting the Android Open Source Project to x86 platform. The Android-x86 Project’s latest release is Android-x86 4.4-r2 from 2015-01-01. The ISO file can be downloaded for free from SourceForge.net or Softpedia. My Android-x86 KitKat 4.4.4 v2 build from 2015-03-07 will cost you 8 $. It has three advantages over the my free Lollipop 5.0.2 versionAptoide App Manager (Google Play Store is used as App Manager in my first version of Android-x86 KitKat from 150301) is pre-installed, a newer kernel (3.18.8) is used and you can run the system in VirtualBox. Read more about my KitKat 4.4.4 version 2 or DOWNLOAD it instantly…

Screenshot

Kernel
Kernel 3.18.8-exton-android-x86+ is used.

Installing new apps
Aptoide App Manager is pre-installed (among many other apps) so you can just go ahead and make your choices. Aptoide works even better than Google Play Store, which is used as App Manager in my first version of Android-x86 KitKat from 150301.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler/loader during the installation of Android KitKat. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”
If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 4.4.4 KitKat 150307 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-07/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-07
initrd /android-2015-03-07/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 150307 (sda8)
root (hd0,7)

kernel /android-2015-03-07/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-07
initrd /android-2015-03-07/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for both of my KitKat versions.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot. On my new HP Pavilion Desktop computer it looks like this.
bios-hp-pavilion

VirtualBox
You can also (of course) run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox.

About Google Keyboard
If you get a message that Google Keyboard has crashed you shall go to Settings >> Language & Input and disable Google Keyboard. The keyboard will work as normal after that.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.

Screenshots
The Desktop (after I have added a few apps)
All apps (after I have added a few)
Aptoide App Manager is used
The file manager is used
Poweroff

Softpedia’s review of AndEX (Android-x86) Lollipop 5.0.2

NOTE
This version has been replaced by version 5 150504 with kernel 4.0.0-exton-android-x86 and GAPPS

Exton logo

8 Comments Android