Tag: install to hard drive

Android-x86_64 Nougat 7.0 with GAPPS and kernel 4.4.19-exton-android-x86_64

andex-nougat-home-desktop-smallestNEWS 160904: AndEX – Nougat 7.0 with kernel 4.4.19-exton-android-x86_64 and GAPPS
My build of Android-x86_64 Nougat 7.0 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Gmail, YouTube and more apps. For example: Aptoide App Manager. The ISO is called android-x86_64-7.0-nougat-gapps-exton-build-689mb-160904.iso.

ABOUT Andex Nougat
My compiled Android-x86_64 system (Nougat 7.0) can run live (from CD) on certain computers. It is best installed to a USB stick or to hard drive and running from there. The system can, however, be installed on almost all newer laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. I can also mention that I could run this Nougat version without problems on a HP Pavilion 500-317no Desktop Computer. I could also run it very well live on the HP Desktop computer. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD before you can install AndEX Nougat to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong. You can also download my Android Nougat system in the form of a zip-file (android-x86_64-7.0-nougat-gapps-exton-build-731mb-160904.zip) and do a manual installation to hard drive. That can even be done to a drive where you already have another Linux system (for example Ubuntu 16.04) installed. Read more about different installations below.

Android Nougat 7.0 was released 160822.

About the Android-x86 project – my sources
All AndEX versions are dependent of the Android-x86 Project’s activity and development.

More about AndEX Nougat
Nougat 7.0 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Nougat. It uses “my” special kernel 4.4.19-exton-android-x86_64 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2016-02-14 will also cost you 9 $. It has two advantages over the Nougat and Marshmallow versions: The system can be used also on older laptops and it runs very well live in VirtualBox. Read more about the KitKat 4.4.4 version 160214 or DOWNLOAD it instantly.

Installing new apps in AndEX Nougat
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices…

Install the system to hard drive
Say for example that you have a laptop with Windows 10 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Nougat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Nogat. Grub will be installed as boot handler/loader during the installation of Android Nougat. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of AndEX. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom – for example:
menuentry ‘Android-x86_64 7.0 Nougat 160904 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2016-09-04/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86_64  \
acpi_sleep=s3_bios,s3_mode androidboot.selinux=permissive SRC=/android-2016-09-04 DPI=140 \
UVESA_MODE=1920×1080

initrd /android-2016-09-04/initrd.img
}

NOTE 1: On some computers you may have to add nomodeset to the linux boot line. If so you may also have to remove DPI=140 and UVESA_MODE=1920×1080 from the linux boot line. (AndEX won’t start otherwise).

NOTE 2: The DPI=140 entry provides a hint about the display’s pixel density in dots per inch. This is an important setting — if the Android display’s icons and text look too small and crowded, increase this number. If things seem too big, make it smaller.

NOTE 3: The UVESA_MODE=1920×1080 entry describes the display size. This is also an important setting. If you know your display’s actual dimensions, enter them here. But not all dimensions work —
it sometimes happens that a display specification that’s possible in principle isn’t feasible in practice.

If you use Grub Legacy (which is very unusual today even though Android Nougat uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86_64 7.0 Nougat 160904 (sda8)
root (hd0,7)

kernel /android-2016-09-04/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86_64 \
androidboot.selinux=permissive SRC=/android-2016-09-04

initrd /android-2016-09-04/initrd.img

Alternative manual installation using android-x86_64-7.0-nougat-gapps-exton-build-731mb-160904.zip
When you unzip android-x86_64-7.0-nougat-gapps-exton-build-731mb-160904.zip you will have a folder called NOUGAT-160904. It has five files, namely data (folder), system (folder), initrd.img, kernel and ramdisk.img. Please note that this Nougat system has more apps pre-installed than what is in the system on the ISO file. If you have installed AndEX Nougat from CD you can simply replace the system folder in the folder android-2016-09-04 with the one in the folder NOUGAT-160904. You can also choose to place the folder NOUGAT-160904 on an empty ext4-formatted partition and/or in the root of another installed Linux system on your computer. If you have (for example) Ubuntu 16.04 installed on /dev/sda5 the Grub2 boot lines would look like this.

menuentry ‘Android-x86_64 7.0 Nougat 160904 (sda5)’ {
insmod part_msdos
insmod ext2
set root=’hd0,msdos5′
linux /NOUGAT-160904/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86_64 \
androidboot.selinux=permissive SRC=/NOUGAT-160904

initrd /NOUGAT-160904/initrd.img
}

Error message re. Google Play Services
When you start up AndEX Nougat for the first time from hard drive (or from a USB stick) you will see a error message saying that Google Play Services has stopped. You must then go to Settings >> Apps >> Google Play Services and give Google Play Services all permissions. After that you won’t see this error message again. Note: Google Play Services is needed for all GAPPS to work, for example Google Play Store.

Bluethooth
Bluetooth is not working.

Language settings
You can (of course) run AndEX Nougat in any language. Just go to Settings and change to your preferred language. The changes will take immediate effect.

Mounting devices
You can’t mount (reach) your internal hard drive. You can however mount a “normal” USB stick. Just go to Settings >> Storage & USB. It will look like this. (I have mounted a USB stick 3.72 GB with CRUX/CruxEX on it).
andex-6.0-usbstick-mount-20151209

Wireless connections
Wifi works alright in AndEX Nougat. Just go to Settings and turn Wifi on. Unfortunately the support for Broadcom Wireless cards is not complete (in the Android-x86 project). I have experience from two different cards – BCM4311 and BCM43142. The first mentioned one works.

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence. Read under A).

VirtualBox installation of AndEX Nougat
You can run AndEX Nougat live in VirtualBox. I.e. the system will start up properly, but you can’t install any new apps. You can, however, test run Web Browsers, YouTube and other apps. Once installed to hard drive (virtually) in VirtualBox the system works very well. Note: My Lollipop (160215) and KitKat (160214) versions can also run very well in VirtualBox. The Lollipop and KitKat systems can also run very well live in VirtualBox.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX Nougat Build 160904 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

NOTE1/WARNING1
You must use a fairly new/modern computer. Android-x86_64 Nougat won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 Build 160214 will run also on older computers.

NOTE2/WARNING2
Before you buy and download this version of AndEX Nougat you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86_64 system. Some very big (around 1GB) games for example won’t run. On the other hand I could run Pes Club Manager, which is of 866 MB and Traffic Rider of about the same size. You must also be aware of that some (many) games need a touchscreen.

Screenshots
Screenshot 1 – AndEX Nougat Desktop
Screenshot 2 – AndEX Nougat Desktop with some extra apps installed – Firefox, Google Chrome, Spotify and Traffic Rider
Screenshot 3 – AndEX Nougat – The Desktop at first boot
Screenshot 4 – AndEX Nougat – The beginning of your configuration – Give Google Play Services all permissions and you won’t see any error messages
Screenshot 5 – AndEX Nougat – Google Play Store running
Screenshot 6 – AndEX Nougat – Adding a Gmail account – must be done for Google Play Store to work
Screenshot 7 – AndEX Nougat – Aptoide App Manager running

DOWNLOAD for 9 $ android-x86_64-7.0-nougat-gapps-exton-build-689mb-160904.iso and android-x86_64-7.0-nougat-gapps-exton-build-731mb-160904.zip – (Both for 9 $)


Note3: Android-x86 KitKat 4.4.4 Exton Build 9 160214 can run on many more laptops/computers than AndEX Nougat 7.0 and/or AndEX (Android-x86) Marshmallow 6.0.1.

Note4: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free from 150307 until 150402. The ISO file was downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Android is a trademark of Google Inc.

20 Comments AndEXAndroid

AndEX (Android-x86) 5.1.1 Lollipop with GAPPS and kernel 4.0.3 – Build 150611

andex-apps-20150610-smallNEWS 150611
I’ve discovered a serious error in Build 150610. I have therefore released a new version of AndEX today (150611). I ask all who have downloaded Build 150610 to contact me so I can send you the new error free ISO of 150611.

NEWS 150611 – AndEX – Lollipop 5.1.1 with kernel 4.0.3 and GAPPS
My new build of Android-x86 Lollipop 5.1.1 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Maps, YouTube and more apps. For example: Facebook and OfficeSuite 8. The ISO is called android-x86-5.1.1-lollipop-kernel-4.0.3-exton-GAPPS-556mb-150611.iso. AndEX 150611 is totally error-free. (This Lollipop version was released April 27, 2015). When running AndEX live you will get some error messages during the setup of your wireless connection and logging into your Google account, but nothing serious – see below under Error messages during setup. For installing new apps you shall always use Google Play Store in AndEX build 150611. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

About AndEX

My compiled Androidx86 system (Lollipop 5.1.1) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.1.1 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 4.0.3-exton-android-x86 with some extra features. I.e. extra drivers. My Android-x86 KitKat 4.4.4 build from 2015-07-21 will also cost you 9 $. I has two advantages over the Lollipop version: You can run the system in VirtualBox and the system can be used also on older laptops. Read more about the KitKat 4.4.4 version 150721 or DOWNLOAD it instantly.

Error messages during setup
It is possible that you will get some “crash messages” when it is time to setup your wireless connection and log in to your Google account. Just close the message windows. Everything works! When you try to run the Gmail app you will most certainly also get a message saying that you have to update Google Play Services. Just do it. It will look like this.

google-play-services-20150611After that everything will be OK! I.e. you can run every installed app and install new apps (via Google Play Store). If, however, the computer locks up during the setup press Ctrl Alt Del and the setup will continue.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support Broadcom wifi cards. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run AndEX you’ll have to use a wired connection.

Installing new apps in AndEX Lollipop
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should always use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Installing 3D games
I wrote an article 150608 about installing 3D games in my KitKat 4.4.4 Build 6. The same games can be installed in AndEX Build 150611. I have also tested Cars: Fast as Lightning and Trials Frontier in AndEX. Those apps ran without problems.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 5.1.1 Lollipop 150611 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-06-07/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-06-07
initrd /android-2015-06-07/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android Lollipop uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 5.1.1 Lollipop 150611 (sda8)
root (hd0,7)

kernel /android-2015-06-07/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-06-07
initrd /android-2015-06-07/initrd.img

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence. Read under A).

VirtualBox

Unfortunately you cannot (normally) run/test the system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. That can however be done if you use my other Android remaster KitKat 4.4.4 version 7 150721.

Updates

If you install Andriod-x86 to hard drive or to a USB stick with persistence all installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150611 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

NOTE1/WARNING1
You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 build 150721 will run also on older computers.

Screenshots
Screenshot 1 – AndEX Desktop with Rain Live wallpaper (pre-installed)
Screenshot 2 – AndEX showing all apps
Screenshot 3 – AndEX running Pool Break Lite in 3D
Screenshot 4 – AndEX running Cars: Fast as Lightning
Screenshot 5 – AndEX running Trials Frontier

NOTE2/WARNING2
Before you buy and download this version of AndEX you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86 system. Some very big (around 1GB) games for example won’t run. On the other hand I could run Pes Club Manager, which is of 866 MB.

Replacement
This build of AndEX (150611) replaces build 150520, which also has GAPPS pre-installed. I will keep it on PayLoadz’s server though since version 150520 uses another kernel – 4.0.0-exton-android-x86.

NEWS 150611
I’ve discovered a serious error in Build 150610. I have therefore released a new error free version of AndEX 150611.

DOWNLOAD
AndEX Build 150611 has been replaced by Build 150916

Note3: Android-x86 KitKat 4.4.4 Exton build 7 150721 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.1.1.

Note4: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free from 150307 until 150402. The ISO file has been downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Android is a trademark of Google Inc.

14 Comments AndEXAndroid

Softpedia’s article about AndEX – The Absolute Ultimate Edition

Softpedia has written a nice article about AndEXThe Absolute Ultimate Edition: http://news.softpedia.com/news/AndEX-Now-Lets-You-Run-Android-Lollipop-5-0-2-on-Your-PC-with-Linux-Kernel-4-0-481962.shtml

No Comments AndEXAndroid

AndEX (Android-x86 Lollipop 5.0.2) with GAPPS and kernel 4.0.0-exton-android-x86

lollipop-desktop-20150520-1-smallNEWS 150520 about AndEX – The Absolute Ultimate Edition
My new build of Android-x86 Lollipop 5.0.2 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-GAPPS-kernel4-exton-687mb-150520.iso. I call it The Absolute Ultimate Edition because AndEX build 150520 is totally error-free. Google Maps is the only app you’ll have to update. (Just start Google Play Store and do it!). All other included apps work perfectly well! You shall always use Google Play Store in AndEX version 150520. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

Unique?
As far as I know there is no other Android-x86 Lollipop 5.0.2 version out there with GAPPS pre-installed.

About AndEX

My compiled Androidx86 system (Lollipop 5.0.2) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD (DVD) if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.0.2 is the second latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live DVD. It uses “my” special kernel 4.0.0-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 build from 2015-06-06 will also cost you 9 $. It has one advantage over the Lollipop version: You can run the system in VirtualBox. Read more about the KitKat 4.4.4 version 150606 or DOWNLOAD it instantly.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support Broadcom wifi cards. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run AndEX you’ll have to use a wired connection.

Installing new apps in AndEX Lollipop
Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should always use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 5.0.2 Lollipop 150520 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-05-04/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-05-04
initrd /android-2015-05-04/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android Lollipop uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 5.0.2 Lollipop 150520 (sda8)
root (hd0,7)

kernel /android-2015-05-04/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-05-04
initrd /android-2015-05-04/initrd.img

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence. Read under A).

VirtualBox

Unfortunately you cannot (normally) run/test the system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. That can however be done if you use one of my other Android remaster KitKat 4.4.4 version 150606.

Updates
If you install Andriod-x86 to hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150520 almost all apps and games can be installed via Google Play Store. Still not convinced? Then read my article about “How useful an Androx-x86 system can be for the average computer user“.

NOTE1/WARNING1
You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remaster KitKat 4.4.4 build 6 will run also on older computers.

Screenshots
Screenshot 1 – AndEX Desktop without modifications
Screenshot 2 – AndEX Desktop with modifications
Screenshot 3 – AndEX Desktop with modifications
Screenshot 4 – AndEX Desktop with modifications
Screenshot 5 – AndEX Desktop with modifications
Screenshot 6 – AndEX Desktop with modifications
Screenshot 7 – AndEX installed apps
Screenshot 8 – AndEX preventing rotation
Screenshot 9 – AndEX using Google Maps

NOTE2/WARNING2
Before you buy and download this version of AndEX you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86 system. Some very big (around 1GB) games for example won’t run. Note about version 150520: While running The Absolute Ultimate Edition you won’t get any error messages.

Replacement
This build (150520) has been replaced by build 150610 – Lollipop 5.1.1.

Note4: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free from 150307 until 150402. The ISO file has been downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Android is a trademark of Google Inc.

6 Comments AndEXAndroid

AndEX (Android-x86) Lollipop 5.0.2 with Google Play Store and other GAPPS

andex-lollipop-5.0.2-20150426-360NEWS 150505 about AndEX – The Ultimate Edition
My new build of Android-x86 Lollipop 5.0.2 has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-GAPPS-exton-782mb-150505.iso. I call it The Ultimate Edition because AndEX 150505 is (almost) error-free. I finally managed to install Google Play Services, which is needed for Google Play Store to run. You shall always use Google Play Store in AndEX version 150505. Only use Aptoide App Manager (which is also pre-installed) if you can’t find the app you are searching for in Google Play Store.

Unique?
As far as I know there is no other Android-x86 Lollipop 5.0.2 version out there with GAPPS pre-installed.

View the boot process >> SLIDESHOW

About AndEX
My compiled Androidx86 system (Lollipop 5.0.2) can run live (from CD or a USB stick) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Asus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD (DVD) if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

More about AndEX
Lollipop 5.0.2 is the second latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live DVD. It uses “my” special kernel 3.10.58-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 build from 2015-05-04 will cost you 9 $. It has two advantages over the Lollipop version: A newer kernel (4.0.0-exton-android-x86) is used and you can run the system in VirtualBox. Read more about the KitKat 4.4.4 version 150504 or DOWNLOAD it instantly.

Wireless connections
When the system has booted up you will normally be asked to configure you wireless network. Unfortunately the Android-x86 project doesn’t support Broadcom wifi cards. Necessary Broadcom drivers can be installed in other Linux systems (for example in Ubuntu), but not (yet) in an Android-x86 system. So if you have a Broadcom wireless card and want to run AndEX you’ll have to use a wired connection.

Installing new apps in AndEX Lollipop

Use Google Play Store or Aptoide App Manager, which are pre-installed. Just make your choices. Normally you should use Google Play Store, but if you can’t find the app you are looking for you can try Aptoide.

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”

If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 5.0.2 Lollipop 150505 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-06/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-06
initrd /android-2015-03-06/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android Lollipop uses it) you should add these lines to /boot/grub/menu.lst
title Android-x86 5.0.2 Lollipop 150505 (sda8)
root (hd0,7)

kernel /android-2015-03-06/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-06
initrd /android-2015-03-06/initrd.img

USB installation
Read my instruction. Learn how you can run AndEX from a USB stick with persistence.

VirtualBox

Unfortunately you cannot (normally) run/test the system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. That can however be done if you use one of my other Android remaster KitKat 4.4.4 version 150504.

Updates
If you install Andriod-x86 to hard drive or to a USB stick with persistence installed apps will be automatically updated/upgraded via Google Play Store. The system will check for updates all the time or after a reboot. It works in the same way as on your Android phone.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc. Also: In AndEX version 150505 almost all apps and games can be installed via Google Play Store.

NOTE1/WARNING1
You must use a fairly new/modern computer. Android-x86 Lollipop won’t run (even start) on older computers. My other Android remasters KitKat 4.4.4 will run also on older computers.

Screenshots
Screenshot 1 – AndEX Desktop without modifications
Screenshot 2 – AndEX Desktop with modifications
Screenshot 3 – AndEX Desktop with modifications 2
Screenshot 4 – AndEX installed apps
Screenshot 5 – AndEX preventing rotation
Screenshot 6 – AndEX using Google Maps

WARNING2
Before you buy and download this version of AndEX you must be aware of that not all apps downloaded from Google Play Store can run in an Android-x86 system. Some very big (around 1GB) games for example won’t run. You must also be aware that you can get all kind of error messages the first time you run AndEX live (from DVD) or from hard drive. Normally you can just close the error windows and go on. Example: You will get a error message saying that Google+ has to be reinstalled. That can be done as soon as you have set up your wireless connection. Please watch the slideshow above. Note about version 150505: While running The Ultimate Edition you won’t get any error messages. Only a message saying that you must update Google Play Services to be able to run Google+.

Replacement
This Ultimate Edition of AndEX replaces version 150426, which also had GAPPS pre-installed. And this version 150505 is replaced by version 150520, which I call The Absolute Ultimate Edition since it is totally error-free. Read more…

Note3: Android-x86 KitKat 4.4.4 Exton build 5 150504 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.0.2.

Note4: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free from 150307 until 150402. The ISO file has been downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Android is a trademark of Google Inc.

6 Comments AndEXAndroid

Android-x86 5.0.2 Lollipop Live CD with kernel 3.10.58-exton-android-x86

Android logoI have compiled an Android x86 system (Lollipop 5.0.2), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

About AndEX
Lollipop 5.0.2 is the latest version of the Android mobile operating system developed by Google. I call my remaster of it AndEX Lollipop Live CD. It uses “my” special kernel 3.10.58-exton-android-x86 with some extra features. I.e. extra drivers and NTFS read/write support. My Android-x86 KitKat 4.4.4 build from 2015-03-21 will cost you 8 $ and my Android-x86 KitKat 4.4.4 build from 2015-03-30 7 $. They have three advantages over the Lollipop version: Aptoide App Manager respectively Google Play Store is pre-installed, a newer kernel (3.18.8 respectively 3.18.2) is used and you can run the systems in VirtualBoxRead more about the KitKat 4.4.4 version 150321 or DOWNLOAD it instantly. Read more about the KitKat 4.4.4 version 150330 or DOWNLOAD it instantly.

Installing new apps in AndEX Lollipop
Use Aptoid Apps Store, which is pre-installed. Just make your choices

Install the system to hard drive

Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android Lollipop on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android Lollipop. Grub will be installed as boot handler/loader during the installation of Android Lollipop. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”
If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 5.0.2 Lollipop 150306 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-06/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-06
initrd /android-2015-03-06/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 5.0.2 Lollipop 150306 (sda8)
root (hd0,7)

kernel /android-2015-03-06/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-06
initrd /android-2015-03-06/initrd.img

USB installation
Read my instruction.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot. On my new HP Pavilion Desktop computer it looks like this.
bios-hp-pavilion

VirtualBox
Unfortunately you cannot (normally) run/test the system in VirtualBox. I.e. run it directly from the ISO file and install it to a hard drive created in VirtualBox. That can however be done if you use one of my other Android remasters KitKat 4.4.4 version 150330.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.

NOTE1/WARNING
You must use a fairly new/modern computer. Android x86 Lollipop won’t run (even start) on older computers. My other Android remasters KitKat 4.4.4 will run also on older computers.

Screenshots
Screenshot 1 – AndEX Desktop without modifications
Screenshot 2 – AndEX installed apps
Screenshot 3 – AndEX preventing rotation
Screenshot 4 – AndEX using Google Maps
Screenshot 5 AndEX with modified Desktop
Screenshot 6 – AndEX with modified Desktop

Note2 that Android-x86 KitKat 4.4.4 Exton build 1, Exton build 2, Exton build 3 and Exton build 4 can run on many more laptops/computers than AndEX (Android-x86) Lollipop 5.0.2.

Note3: The AndEX Lollipop ISO has been out on SourceForge.net and the Swedish Linux Society for free since 150307 until today (150402). The ISO file has been downloaded about 50000 times during that period. More than any of my other Linux distributions (ever).

Note4: This first version of AndEX has been replaced by version 150505, which has GAPPS pre-installed. I.e. Google Play Services, Google Play Store, Google+, Maps, YouTube and more apps. The ISO is called android-x86-5.0.2-lollipop-GAPPS-exton-782mb-150505.iso.

READ MORE…

Android is a trademark of Google Inc.

21 Comments AndEXAndroid

Android KitKat 4.4.4 x86 – Exton build – for laptops

Android logoI have compiled an Android x86 system (KitKat 4.4.4), which can run live (from CD) or be installed on almost all laptops (and some Desktop computers). For example Acer (Aspire), HP, Samsung, Dell, Toshiba, Lenovo, Thinkpad, Fujitsu, Panasonic and Ausus laptops. The Android system is distributed in the form of an ISO file as the rest of my Linux distributions. I.e. you must (as usual) burn the ISO file to a CD if you want to run the system live on your computer or install it to hard drive. Read about how to burn ISO files. Or skip that. Just use ImgBurn. Nothing can go wrong.

Replacement for Windows, Mac or even Linux Desktop systems?
Some belive what I just said. The Android-x86 Project (Run Android on your PC) is about porting the Android Open Source Project to x86 platform. The Android-x86 Project’s latest release is Android-x86 4.4-r2 from 2015-01-01. The ISO file can be downloaded for free from SourceForge.net or Softpedia. My Android-x86 KitKat 4.4.4 build from 2015-03-01 will cost you 7 $. It has three advantages over the my free Lollipop 5.0.2 version: Google Play Store is pre-installed, a newer kernel (3.18.2) is used and you can run the system in VirtualBox. Read more about the KitKat 4.4.4 version or DOWNLOAD it instantly…

Boot screen

Kernel
Kernel 3.18.2-android-x86+ is used.

Installing new apps
Google Play Store is pre-installed (among many other apps) so you can just go ahead and make your choices…

Install the system to hard drive
Say for example that you have a laptop with Windows 8.1 installed as the only operating system. If you just create one extra partition of about 5 GB you can install Android KitKat on this extra partition and then “dual-boot”. I.e. you can turn on your computer (called “booting it up”) and decide whether you want to start Windows or Android KitKat. Grub will be installed as boot handler/loader during the installation of Android KitKat. Note: The installation will take only about one minute. And the installation to hard drive is so simple that a 10 year old child can do it.

More about Grub and “dual-boot/multi-boot”
If you already have have one or more Linux systems installed on your computer you should skip installing Grub during the installation of Android KitKat. If you use Grub2 (which Ubuntu and most other Linux systems use as boot loader) you should instead add these lines to /boot/grub/grub.cfg or /etc/grub.d/40_custom
menuentry ‘Android-x86 4.4.4 KitKat 150301 (sda8)’ {
insmod gzio
insmod part_msdos
insmod ext2
set root=’hd0,msdos8′
linux /android-2015-03-01/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-01
initrd /android-2015-03-01/initrd.img
}

If you use Grub Legacy (which is very unusual today even though Android KitKat uses it) you should add thease lines to /boot/grub/menu.lst
title Android-x86 4.4.4 KitKat 150301 (sda8)
root (hd0,7)

kernel /android-2015-03-01/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-2015-03-01
initrd /android-2015-03-01/initrd.img

USB installation
Read my instruction. It is for AndEX (Android) Lollipop, but the same instruction works for my KitKat version.

NOTE ABOUT BIOS CHANGES
You’ll have to make changes in BIOS (boot order) so that your computer will start up from the CD or USB stick before the hard drive. On a new computer you may also have to change from UEFI Boot to Legacy Boot. On my new HP Pavilion Desktop computer it looks like this.
bios-hp-pavilion

VirtualBox
You can also (of course) run/test the system in VirtualBox. I.e. run it directly from the ISO file and even install it to a hard drive created in VirtualBox.

What’s the point?
Well, if you like your Android phone and all the apps you have installed on it I’m sure you will also like to run apps from your laptop. Bigger screen and better sound etc.

Screenshots
The boot screen
The welcome screen
The Desktop (after I have added a few apps)
All apps (after I have added a few)
Google Play Store is used
The file manager is used
Poweroff

NOTE
This version has been replaced by version 5 150504 with kernel 4.0.0-exton-android-x86 and GAPPS

Android is a trademark of Google Inc.

4 Comments AndEXAndroid